Industrial Casters Production Process

With the passage of time now the industrial casters on the market casters products are gradually increased, it may also be the market demand to meet the needs of different customers. Whether it is now or before, whether it is new products or old products, the caster production process is the same. Industrial casters are generally divided into plastic and hardware two parts, these two parts have their own different production process.

1, injection part

Drying - Cutting - Injection Molding - Finishing - Trimming - Cooling - Bearing

2, hardware part

Open embryo - pressure type - drilling - forming - hair outside (heat treatment - plating)

After these two parts are completed, unified into the assembly plant for assembly, packing box storage. At this caster production is complete!

  Industrial casters are generally made up of brackets and wheels. Scaffolds are generally metal, but there are plastic, plastic stent we often call the plastic support, the general use of the medical industry more, there are furniture wheel industry is more plastic stent. And in our industry with the most of the metal stent.

First, industrial casters can be called directional casters and universal casters. The caster is equipped with a single wheel and can only move along a straight line. Universal casters are from 360 degrees to the stent with a single round, can be free to move in any direction.

Second, the installation height: refers to the vertical distance from the ground to the installation location of the equipment, industrial casters installed with the height of the casters with the wheel far and far away from the maximum vertical distance. Stent steering center distance: refers to the horizontal distance of the center rivet vertical line to the center of the wheel core.

Third, the rotation radius: refers to the center of the rivet vertical line to the outer edge of the horizontal distance of the tire, the appropriate distance so that the casters can be turned 360 degrees. Rotation radius of the reasonable or not directly affect the service life of the casters.

Fourth, turn: hard, narrow wheels than soft, wide wheels easier to turn. Rotation radius is an important parameter of the rotation of the wheel. If the radius of rotation is too short, it will increase the difficulty of steering. If it is too large, it will cause the wheel to shake and shorten the life.

Fifth, driving flexibility: the impact of industrial casters driving flexibility of the factors of the structure of the stent and stent steel selection, the size of the wheel, wheel type, bearings, etc., the greater the flexibility of the wheels the better driving, The narrow wheels are less effortier than the flat side of the wheels, but on the uneven ground the soft wheels are labor-saving, but on the uneven ground the soft wheels can better protect the equipment and shock.